Structure of Mitsubishi centrifugal oil purifiers (separators) SJ30F, SJ15F, SJ10T, SJ15T, SJ10G, SJ20G, SJ2000,..etc. The main parts of the centrifugal oil purifier include the separator cover, driving electric motor, friction clutch, horizontal shaft gear, oil pump, separator body, vertical shaft, separator drum, etc. Drum structure of Mitsubishi oil purifier SJ30F, SJ15F, SJ10T, SJ15T, SJ10G, SJ20G,
1. Principle of separation of solids from liquids As we know, if we want to remove solid particles from a liquid (e.g. fuel), we can put the mixture of liquid and solid into a vessel. Solid particles mixed in the liquid will tend to settle to the bottom of the vessel thanks to the difference
The basic operating principle of a centrifugal oil separator system Dirty oil is continuously fed into the centrifugal separator as in conventional ones. Clean oil is continuously discharged from the machine through the clean oil exit path, the residue is collected in the residue tank in the drum. On the clean oil exit path, there
Structural characteristics of centrifugal oil purifiers Electric motor: This motor is responsible for driving different parts such as the drum and gear pumps through a hybrid joint. Friction clutch: The friction clutch is installed on the horizontal shaft to protect the electric motor from damage. Because the filter drum assembly is too heavy for the
Necessary technical parameters when choosing an industrial pump 1. Capacity: Flow rate is the amount of fluid flowing through a hydraulic machine in a unit of time. Flow can be measured by volume, weight, or mass. The corresponding symbol is Q. The corresponding standard unit is m3/s hoặc m3/m. 2. Pump head or Head:
JIS Flange Standards JIS standards are the abbreviation of the English phrase: Japan Industrial Standards. This standard is commonly used in Japan and Asian countries. JIS 5K (Jis 5kgf/cm2 – Working pressure up to 5 bars). JIS 5K (Jis 5kgf/cm2 – Working pressure up to 5 bars) Size mm d Inner
DIN Flange Standards DIN standard is an abbreviation of the German phrase: Deutsches Institut für Normung. This standard is commonly used in Germany and European countries. DIN PN6 standard meets a working pressure of 6 bars. DIN PN6 meets working pressure up to 6 bars Inch DN ISO DIN d5 Inner Diameter D Outer Diameter
Home
Introduction
Products
Services
News
Contact
