Structure of Mitsubishi centrifugal oil purifiers (separators) SJ30F, SJ15F, SJ10T, SJ15T, SJ10G, SJ20G, SJ2000,..etc.
The main parts of the centrifugal oil purifier include the separator cover, driving electric motor, friction clutch, horizontal shaft gear, oil pump, separator body, vertical shaft, separator drum, etc.
Drum structure of Mitsubishi oil purifier SJ30F, SJ15F, SJ10T, SJ15T, SJ10G, SJ20G, SJ2000, etc.
1. Water pump impeller, 2. Gravity disc, 3. Oil pump impeller, 4. Leveling impeller,
5. Drum cover, 6. Top disc, 7. Disc stack, 8. Distribution shaft, 9. Lower sliding cylinder,
10. Drum body, 11. Sliding disc of descaling mechanism, 12. Spring, 13. Drum opening and closing water supply disc,
14. Drum opening and closing control water line, 15. Drum opening and closing water line, 16. Exhaust valve,
17. Drain hole, 18. Drum fixing nut, 19. Lock nut.
The drum body 10 and the drum cover 5 are linked by a retaining ring 18. Inside the drum is installed a distribution shaft No. 8 and a set of discs No. 7, among which there is a top disc No. 6. The top disc and the retaining ring create a separate compartment in which 3 impellers are installed to pump clean oil. The separated water flows into the upper separation chamber of the drum through the adjusting ring (gravity disc) 2. The regulating ring is fitted to the drum cover by a small retaining ring 19 and also forms the upper part of the upper separation chamber. For this type of separator, above the drum cover there is a pump impeller 1, the heavy liquid (water) is pushed out of the drum through the adjusting ring 2.
Functions of main parts in the purifier:
The function of the separator drum cover
Separator drum cover (Bowl cover): The drum cover is fixed to the drum body thanks to the locking nut. The drum cover combines with the drum body to form a separation space of the separator.
The function of the lower sliding cylinder (bowl)
Lower sliding bowl: This is the lowest part of the separator drum that can slide up and down in the drum body to close or open the drum.
Function of the drum body
Drum body: This is the main part that combines the drum cover with the lower sliding cylinder to form a separation space.
The function of the main seal ring
Main seal ring: To seal the separation space between the top cover of the separator drum and the lower sliding cylinder of the separator drum. This seal ring is a trapezoidal plastic gasket.
The function of the lock ring of the drum
Lock ring of drum: To fix the drum cover to the drum body.
Functions of oil distribution equipment
Distributor: Distributes oil to the bottom of the drum.
The function of the top disc
Top disc: Separates the oil phase and water phase, oil flows on the bottom side and water flows on the top side of the disc. In three-phase purifiers, the top disc surface has a groove to guide water out, while in bottle-filter machines, the surface of the top disc is smooth.
The function of the separator disc stack
Disc set: A set of separator discs stacked on top of each other to form a separation space inside the separator drum. The stack of discs is stacked on top of each other and fixed by the oil distribution device. A stack of discs has about 100-110 discs.
The function of the gravity disc
Gravity disc: This is the part that creates a neutral surface inside the separator drum. The inner diameter of the gravity disc determines the position of the interface between the oil phase and the water phase.
Function of the residue discharge door on the drum body
Sludge discharge ports on the drum body (Sludge discharge ports): These are ports used to discharge sediment accumulated in the filter drum body during the separation process.